Sony xci-sx100c 기술 매뉴얼 - 페이지 8

{카테고리_이름} Sony xci-sx100c에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony xci-sx100c 23 페이지. Intelligent
Sony xci-sx100c에 대해서도 마찬가지입니다: 운영 지침 (2 페이지)

Installation

The camera body is designed to externally dissipate heat

built up internally during operation.

Install the camera as shown below to promote heat

dissipation and retain optimum performance of the

camera.

• using a suspension support

• using a tripod

• using a metal plate

Note

Do not attach to a board made of wood, resin, etc. that

may block heat dissipation.

Loosen the two screws and remove the cover.

Press the eject button and insert the CompactFlash

slot.

Mount the cover to the camera module, pressing the

CompactFlash slot with the cover inside.

Fasten the two screws to secure the cover.

Screw

Eject button

This camera module supports a C mount lens as the

factory setup. If you will be using a CS mount lens,

perform the following steps:

Insert two 3- mm Allen wrenches (commercially

available) through the screw-recess holes of the C

mount adaptor.

Turn the Allen wrenches counterclockwise.

Remove the C mount adaptor.

If you need to use the C mount adaptor again, follow

steps 1 to 3 in reverse order.

Note

When you fit the C mount adaptor again after removal,

a flange focal length may change. When refitting the

mount, turn the wrenches while applying about 2.5 Nm

of torque.