Sony XCL-CG510C 기술 매뉴얼 - 페이지 18

{카테고리_이름} Sony XCL-CG510C에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony XCL-CG510C 48 페이지. Digital video camera module

페이지 인쇄

1. Features

Binning

By adding 2 vertical pixels or 2 horizontal pixels, the

frame rate is increased the sensitivity. The color camera

cannot set this. This can be set with or without a trigger.

Partial scan can be used concurrently and horizontal and

vertical can be set at the same time.

Command

Parameter

VBIN

HBIN

Output Bit Length

Toggling between 8 bit/10 bit/12 bit for monochrome

camera, and toggling between Raw output 8 bit/10 bit/

12 bit and RGB output 24 bit for color camera are

available.

Command

Parameter

PIXEL-DEPTH

8/10/12/24*

* XCL-CG510C only

Image flip

Flips an image vertically and horizontally.

Reboot the unit to reflect the changes of the setting.

Parameter

REVERSEX

REVERSEY

Setting

No binning

Vertical binning

No binning

Horizontal binning

Function

0/1

0: Normal

1: Inversion

0/1

0: Normal

1: Inversion

Gain

Manual gain

Manual gain can be set finely in 0.1dB increments.

Although the settable lower/upper limit values of the

gain are slightly different in each camera, the GAIN

parameter value can be set from –1 dB or less to 27 dB

or more. Same as the gain, the parameter value of the

GAIN-FINE can be set from –10 or less to 270 or more.

The setting range of the gain that guarantees image

quality is from 0 dB to 18 dB.

Command

Command parameter

GAIN

–1 or less ~ 0 ~ 27 or more

GAIN-FINE

–10 or less ~ 0 ~ 270 or

Auto gain (AGC)

By executing the GAIN-AUTO command, the gain is

automatically adjusted according to the image pickup

environment. AGC works so that the average level in a

detection frame may reach AGC-LEVEL. The AGC

detection frame is set to the central region by default.

The detection frame can be displayed or the detection

area changed.

Command

Parameter

GAIN-AUTO

(AGC)

AGC-LEVEL

0 to 11264 to

16383

AGC-SPEED

1 to 256

AGC-UPPER

0 to 18

AGC-

0 to 18

LOWER

AGC-

FRAME-

HIGHLIGHT

Command Parameter

AGC-

1 to 100

FRAME

Setting

Gain dB unit

Gain advanced

setting

Setting

Manual gain

One-push AGC

Continuous AGC

AGC target level (14 bit)

AGC convergence speed

AGC upper limit (dB)

AGC lower limit (dB)

AGC detection frame is

hidden

AGC detection frame is

displayed

Parameter

1 to 100

0 to 99