Sony BDV-E2100 빠른 시작 매뉴얼 - 페이지 14

{카테고리_이름} Sony BDV-E2100에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony BDV-E2100 17 페이지. Blu-ray disc/dvd home theatre system
Sony BDV-E2100에 대해서도 마찬가지입니다: 제한 보증 (1 페이지), 빠른 설정 매뉴얼 (2 페이지), 스피커 설치 매뉴얼 (2 페이지), 사양 (5 페이지), 스피커 설치 매뉴얼 (2 페이지), 빠른 설정 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 서비스 매뉴얼 (4 페이지)

Troubleshooting

If you experience any of the following difficulties while using

the system, use this troubleshooting guide to help remedy the

problem before requesting repairs.

Also consult the Operating Instructions on the following website:

http://support.sony-europe.com/

The power does not turn on.

Check that the AC power cord (mains lead) is securely

connected to the wall outlet (mains).

The system does not work normally.

Disconnect the AC power cord (mains lead) from the wall

outlet (mains), then reconnect after several minutes.

The system does not output sound of the TV program when

connected to a set-top box.

Check the connections.

Select the correct input of the system to which the set-top box

is connected.

A disc does not play.

The region code of the disc does not match the system.

Moisture has condensed on the lenses inside the main unit.

Remove the disc and leave the main unit turned on for about

half an hour.

The disc is not correctly finalized.

Reducing power usage to less than 0.3 W in

Press HOME, and then press /// to select [Setup]. Check that

the following settings are made:

Select [System Settings] > [HDMI Settings] > [Control for HDMI],

then set [Control for HDMI] to [Off ].

Select [System Settings] > [Quick Start Mode], then set [Quick

Start Mode] to [Off ].

Select [Network Settings] > [Remote Start], then set [Remote

Start] to [Off ].