Sony BDV-E2100 Manual de início rápido - Página 14

Procurar online ou descarregar pdf Manual de início rápido para Sistema estéreo Sony BDV-E2100. Sony BDV-E2100 17 páginas. Blu-ray disc/dvd home theatre system
Também para Sony BDV-E2100: Garantia limitada (1 páginas), Manual de configuração rápida (2 páginas), Manual de instalação do altifalante (2 páginas), Especificações (5 páginas), Manual de instalação do altifalante (2 páginas), Configuração rápida (2 páginas), Manual de configuração rápida (2 páginas), Manual de serviço (4 páginas)

Troubleshooting

If you experience any of the following difficulties while using

the system, use this troubleshooting guide to help remedy the

problem before requesting repairs.

Also consult the Operating Instructions on the following website:

http://support.sony-europe.com/

The power does not turn on.

Check that the AC power cord (mains lead) is securely

connected to the wall outlet (mains).

The system does not work normally.

Disconnect the AC power cord (mains lead) from the wall

outlet (mains), then reconnect after several minutes.

The system does not output sound of the TV program when

connected to a set-top box.

Check the connections.

Select the correct input of the system to which the set-top box

is connected.

A disc does not play.

The region code of the disc does not match the system.

Moisture has condensed on the lenses inside the main unit.

Remove the disc and leave the main unit turned on for about

half an hour.

The disc is not correctly finalized.

Reducing power usage to less than 0.3 W in

Press HOME, and then press /// to select [Setup]. Check that

the following settings are made:

Select [System Settings] > [HDMI Settings] > [Control for HDMI],

then set [Control for HDMI] to [Off ].

Select [System Settings] > [Quick Start Mode], then set [Quick

Start Mode] to [Off ].

Select [Network Settings] > [Remote Start], then set [Remote

Start] to [Off ].