Argo TABLO 사용 설명서 - 페이지 5
{카테고리_이름} Argo TABLO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo TABLO 8 페이지. Desk and stand fan
Open the box and remove the parts of the appliance.
CONNECT THE ROD TO THE BASE USING THE SUPPLIED LOCKING LEVER AND FOLLOW THESE INSTRUCTIONS:
1. The fan is supplied with the locking
lever included into the outer rod.
4 Insert the base below the outer rod.
7. Unscrew the ring for adjusting the
height and pull out the inner rod
The appliance does not need to be installed.
Position the unit on a flat, stable surface.
To move the fan use the handle on the back.
Connect the power cord to a suitable power socket (220-240 V~).
Do not use this fan in an area with high humidity, rich of dust or water.
Tilt adjustment: to regulate the air flow upward or downward, push gently the motor housing and adjust the angle of
inclination with respect to the neck.
V 11/15
STAND FAN - ASSEMBLY INSTRUCTIONS
2. Loose the locking lever.
5. Tighten the locking lever.
.
8. Mount the part with the fan.
HOW TO USE THE APPLIANCE
3. Remove the locking lever.
6. The base is inserted.
9. Screw the screw.
13