Argo TABLO 사용 설명서 - 페이지 6
{카테고리_이름} Argo TABLO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo TABLO 8 페이지. Desk and stand fan
페이지 인쇄Press ON/OFF on the control panel or remote control.
A sound will indicate that the appliance is on, with low fan speed.
This fan can be used both as a fan, with 3 modes (NATURE, SLEEP and NORMAL,, when no mode has been selected) and
3 fan speed options (low, medium and high).
In each of the 3 modes, by pressing the SPEED button you can change the fan speed (low - L, medium - M, High - H) which
is fixed if the SLEEP and NATURE modes and are not selected, but can be changed in NATURE and SLEEP modes.
MODE display
Ventilation mode display
NATURE
SLEEP
SPEED display
Fan speed display
low/med/high
SPEED button
Touching the button SPEED
the fan speed increase from
low to medium to high.
ON/OFF button
Touching the ON/OFF button
the appliance begins to operate at
low speed.
To switch off the fan press the
button again.
V 11/15
CONTROL PANEL AND AVAILABLE FUNCTIONS
OPERATION LED
BUTTONS
TIMER display
SWING display
SWING button (OSC)
When the appliance is operating,
touch the button OSC to make the
appliance oscillate automatically,
shifting the air flow from left to
right.
Touch the button SWING again to
interrupt the oscillation.
TIMER button
When the appliance is operating,
the operating time can be set by
touching the TIMER button by 0.5 h
step, up to 7,5 hours.
The TIMER DISPLAY is switched
on simultaneously and shows the
time set.
The unit will switch off automatically
at the end of the programmed time.
14