Cisco ASA 5506-X 설치 매뉴얼 - 페이지 33

{카테고리_이름} Cisco ASA 5506-X에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506-X 46 페이지. Threat defense reimage guide
Cisco ASA 5506-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (12 페이지), 섀시 마운트 (10 페이지), 하드웨어 설치 매뉴얼 (26 페이지)

Mount the Chassis

You can only mount the chassis with the front panel oriented toward either the ceiling or the floor. Wall mounting in

other orientation is not supported.

What to do next

Install the cables as described in

Rack-Mount the Chassis

Follow these steps to mount the chassis in a rack-mount shelf.

Note

You mount only one ASA 5506H-X in the rack-mount shelf.

The dimensions of the ASA 5506H-X are 3.46 x 18.3 x 19.5 in. (8.79 x 46.48 x 49.52 cm). The PID is

asa5506h-rack-mnt=.

Step 1

Place the chassis upside down on a large, stable work area. If you are installing two chassis in the shelf, place the second

chassis beside the first, also upside down.

Step 2

Invert the sliding trays and position the chassis on top of them such that the front of the device(s) and the front of the tray

are in the same direction.

Step 3

Adjust the position of the first chassis and the tray until the three mounting holes in the dimples in the bottom of the shelf

are aligned with the mounting holes in the bottom of the chassis.

Step 4

Tighten the captive tray screws into the shelf to lock it into place.

Figure 23: ASA 5506-X and ASA 5506W-X in the Rack-Mount Shelf

Online Only

Quick Start Guide

for your default software configuration.

Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide

Rack-Mount the Chassis