Cisco ASA 5506-X 하드웨어 설치 매뉴얼 - 페이지 14

{카테고리_이름} Cisco ASA 5506-X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506-X 26 페이지. Threat defense reimage guide
Cisco ASA 5506-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (12 페이지), 설치 매뉴얼 (46 페이지), 섀시 마운트 (10 페이지)

Position the ASA

This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation.

Install only in accordance with national and local wiring regulations. (Statement 1045)

Short-Circuit Protection Warning

This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation.

Install only in accordance with national and local wiring regulations. (Statement 1045)

SELV Circuit Warning

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage

(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and

WAN ports both use RJ-45 connectors. Use caution when connecting cables. (Statement 1021)

Ground Conductor Warning

This equipment must be grounded. Never defeat the ground conductor, or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority, or an electrician

if you are not certain that suitable grounding is available. (Statement 1024)

Product Disposal Warning

Ultimate disposal of this product should be handled according to all national laws and regulations. (Statement

1040)

Compliance with Local and National Electrical Codes Warning

Installation of the equipment must comply with local and national electrical codes. (Statement 1074)

TN Power Warning

The device is designed to work with TN power systems. (Statement 19)

Circuit Breaker (15A) Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that a fuse

or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase

conductors (all current-carrying conductors). (Statement 13)

Grounded Equipment Warning

This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal

use. (Statement 39)

Safety Cover Requirement

The safety cover is an integral part of the product. Do not operate the unit without the safety cover installed.

Operating the unit without the cover in place will invalidate the safety approvals and pose a risk of fire and

electrical hazards. (Statement 117)

Position the ASA

Whether positioning the ASA on a desktop, on a non-rack closet shelf, or mounting it on a wall, consider the

following:

• Be sure to choose an area where the ASA is out of the way to make sure it is not bumped or accidentally

Cisco ASA 5506-X Hardware Installation Guide

dislodged. The appliance has "feet" on the bottom so it does not sit flush where placed, thus allowing

proper air circulation through and around it. Make sure that the appliance is not tightly enclosed or

crowded by other objects that might impede proper circulation.

Prepare for Installation

Online Only