Cisco ASA 5506-X 하드웨어 설치 매뉴얼 - 페이지 15

{카테고리_이름} Cisco ASA 5506-X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506-X 26 페이지. Threat defense reimage guide
Cisco ASA 5506-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (12 페이지), 설치 매뉴얼 (46 페이지), 섀시 마운트 (10 페이지)

Prepare for Installation

• Choose a location that lets you easily bring the power cord and Ethernet and console cables to the ASA,

Safety Recommendations

Use the information in the following sections to help ensure your safety and to protect the ASA. This

information may not address all potentially hazardous situations in your working environment, so be alert and

exercise good judgment at all times.

Observe these safety guidelines:

• Keep the area clear and dust-free before, during, and after installation.

• Keep tools away from walkways, where you and others might trip over them.

• Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the

• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

• Never attempt to lift an object that is too heavy for one person.

Before working on a chassis, be sure the power cord is unplugged.

Follow these guidelines when working on equipment powered by electricity:

• Before beginning procedures that require access to the interior of the chassis, locate the emergency

• Do not work alone if potentially hazardous conditions exist anywhere in your work space.

• Never assume that power is disconnected; always check.

• Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension

• If an electrical accident occurs:

• Use the ASA within its marked electrical ratings and product usage instructions.

Online Only

with plenty of slack and yet tucked away, so they cannot be inadvertently unplugged.

chassis.

power-off switch for the room in which you are working. Then, if an electrical accident occurs, you can

act quickly to turn off the power.

cables, frayed power cords, and missing safety grounds.

◦ Use caution; do not become a victim yourself.

◦ Disconnect power from the system.

◦ If possible, send another person to get medical aid. Otherwise, assess the condition of the victim,

and then call for help.

◦ Determine whether the person needs rescue breathing or external cardiac compressions; then take

appropriate action.

Safety Recommendations

Cisco ASA 5506-X Hardware Installation Guide