Cisco ASA 5506W-X 섀시 마운트 - 페이지 8

{카테고리_이름} Cisco ASA 5506W-X에 대한 섀시 마운트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506W-X 10 페이지. Threat defense reimage guide
Cisco ASA 5506W-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 구성 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (12 페이지), 설치 매뉴얼 (46 페이지)

Install the ASA 5506H-X in a DIN Rail

Figure 7: Completed Rack Shelf/Tray Installation

Step 10

Install the sliding-rack tray into your rack using the correct screws (12-24 x 0.75 inch or 10-32 x 0.75 inch) from the

rack-mount kit that fit your rack type.

What to do next

Install the cables according to your default software configuration as described in the

Series Quick Start

Install the ASA 5506H-X in a DIN Rail

You can use the 7.5 mm thick 45 mm wide top hat DIN rail for the ASA 5506H-X. Secure the DIN rail to the

mounting surface approximately every 7.8 inches (200 mm) and use end-anchors appropriately.

Note

We recommend that you install the ASA 5506H-X on a steel DIN rail for extra stability.

To attach the ASA 5506H-X to a 35 mm wide DIN rail, follow these steps:

Step 1

Attach the DIN rail bracket to the back of the chassis using the four screws provided.

Mount the Chassis

Guide.

Mount the Chassis

Cisco ASA 5506-X