Sony MHC-RG190 사용 설명서 - 페이지 23

{카테고리_이름} Sony MHC-RG190에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-RG190 32 페이지. Mini hi-fi component system
Sony MHC-RG190에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지), 서비스 매뉴얼 (5 페이지)

페이지 인쇄

Troubleshooting

Make sure the power cord and speaker

cords are correctly

and firmly connected.

2 Find your problem

in the checklist

below,

and take the indicated

corrective

action.

If the issue persists, cuntact yuur nearest

Sony dealer.

If the STANDBY

indicator

flashes

Immediately

unplug the pu'_er curd, and

check the lbllowing

item.

If your system has a voltage selector, is the

voltage selector set to the correct voltage?

Are the + and - speaker curds short-

circuited?

Are you using only the supplied speakers'?

ls anything

blocking

the ventilation

holes

on the back of the system?

Xfter the STANDBY

indicator

[_ stops

flashing, reconnect

the power cord, and turn

on tile system. If tile issue persists, cuutact

your

nearest

Sony

dealer.

General

The display

starts flashing

as soon as

you plug in the power cord even though

you have not turned on the system.

• Press DISPLAY

[_ twice while tile system is

uff. The demunstration

disappears.

Sound comes from one channel,

or the

left and right volumes

are unbalanced.

• Place the speakers as symmetrically

possible.

• Connect only the supplied speakers.

Sound lacks bass.

• Check that the striped (ur solid) curd is

connected

tu the speaker's

- (or +)jack

correctly.

Severe hum or noise.

• Move tile system away ['roul sources of

noise.

• Connect the system to a different

wall

socket.

• Install a noise filter (available

separately)

tile puwer cord.

The remote

does not function.

• Remove

any obstacles between

tile remote

and the remute sensor [] un tile unit, and

position

the unit away from fluorescent

lights.

• Point the remote at the system's

sensor.

• Move the remote closer to the system.

CD/MP3player

The sound skips, or the disc will not

play.

• Wipe tile disc clean, and replace it.

• Muve the system tu a location away fl'om

vibration

(1or example,

on top of a stable

stand).

• Muve the speakers away from the system,

or place them on separate stands. At high

vulume, speaker vibration

may cause the

suund to skip.

Play does not start from the first track.

• Press PLAY MODE [] repeatedly

until both

"PGM" and "SHUF'

disappear

to return to

nomml play.

Starting

playback

takes more time than

usual.

• Tile folluwing

disc's take a longer time to

start playback.

- a disc recorded with a complicaled tree structure.

a disc recorded in multisession mode.

a disc that has not been finalized(a disc to which

data can be added).

- a disc that has many lolders.

Tuner

Severe hum or noise, or stations

cannot

be received.

("TUNED"

or "STEREO"

flashes

on the display.)

• Connect

the :mtenua properly.

• Find a location and an orientation

that

provide good reception,

and then set up tile

antelula

again.

• Connect

a commercially

available external

antelula.

• Turn uff nearby electrical equipment.

Continued

23 GB