Sony MHC-RG190 Інструкція з експлуатації Посібник з експлуатації - Сторінка 23
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Стереосистема Sony MHC-RG190. Sony MHC-RG190 32 сторінки. Mini hi-fi component system
Також для Sony MHC-RG190: Інструкція з експлуатації Посібник з експлуатації (32 сторінок), Посібник з експлуатації (5 сторінок)
Друкувати сторінку
Troubleshooting
1
Make sure the power cord and speaker
cords are correctly
and firmly connected.
2 Find your problem
in the checklist
below,
and take the indicated
corrective
action.
If the issue persists, cuntact yuur nearest
Sony dealer.
If the STANDBY
indicator
flashes
Immediately
unplug the pu'_er curd, and
check the lbllowing
item.
If your system has a voltage selector, is the
voltage selector set to the correct voltage?
Are the + and - speaker curds short-
circuited?
Are you using only the supplied speakers'?
ls anything
blocking
the ventilation
holes
on the back of the system?
Xfter the STANDBY
indicator
[_ stops
flashing, reconnect
the power cord, and turn
on tile system. If tile issue persists, cuutact
your
nearest
Sony
dealer.
General
The display
starts flashing
as soon as
you plug in the power cord even though
you have not turned on the system.
• Press DISPLAY
[_ twice while tile system is
uff. The demunstration
disappears.
Sound comes from one channel,
or the
left and right volumes
are unbalanced.
• Place the speakers as symmetrically
as
possible.
• Connect only the supplied speakers.
Sound lacks bass.
• Check that the striped (ur solid) curd is
connected
tu the speaker's
- (or +)jack
correctly.
Severe hum or noise.
• Move tile system away ['roul sources of
noise.
• Connect the system to a different
wall
socket.
• Install a noise filter (available
separately)
to
tile puwer cord.
The remote
does not function.
• Remove
any obstacles between
tile remote
and the remute sensor [] un tile unit, and
position
the unit away from fluorescent
lights.
• Point the remote at the system's
sensor.
• Move the remote closer to the system.
CD/MP3player
The sound skips, or the disc will not
play.
• Wipe tile disc clean, and replace it.
• Muve the system tu a location away fl'om
vibration
(1or example,
on top of a stable
stand).
• Muve the speakers away from the system,
or place them on separate stands. At high
vulume, speaker vibration
may cause the
suund to skip.
Play does not start from the first track.
• Press PLAY MODE [] repeatedly
until both
"PGM" and "SHUF'
disappear
to return to
nomml play.
Starting
playback
takes more time than
usual.
• Tile folluwing
disc's take a longer time to
start playback.
- a disc recorded with a complicaled tree structure.
a disc recorded in multisession mode.
a disc that has not been finalized(a disc to which
data can be added).
- a disc that has many lolders.
Tuner
Severe hum or noise, or stations
cannot
be received.
("TUNED"
or "STEREO"
flashes
on the display.)
• Connect
the :mtenua properly.
• Find a location and an orientation
that
provide good reception,
and then set up tile
antelula
again.
• Connect
a commercially
available external
antelula.
• Turn uff nearby electrical equipment.
Continued
o
(D
23 GB