Sony PFV-SP3300 설치 매뉴얼 - 페이지 7
{카테고리_이름} Sony PFV-SP3300에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony PFV-SP3300 16 페이지. Signal processing unit, backup power supply unit
Sony PFV-SP3300에 대해서도 마찬가지입니다: 운영 매뉴얼 (18 페이지), 운영 매뉴얼 (18 페이지), 유지 관리 매뉴얼 (40 페이지)
페이지 인쇄
1-4. Installing/Removing Optional Power
Supply Unit
w
Before installing the backup power supply unit HK-PSU03
in PFV-SP3300, set the power switch of HK-PSU03 to the
"O" position (OFF).
Otherwise, deterioration of a connector which connects
HK-PSU03 to PFV-SP3300 may cause a fire.
Installation Procedure
1. Loose the four screws and remove the front panel.
Screws
(with stoppers)
Front panel
Screws
(with stoppers)
2. Remove the two screws and remove the blank panel in
the empty slot for the backup power supply unit.
n
Keep the blank panel which is removed.
PSW
3x8
PSW 3x8
Blank panel
PFV-SP3300
1-4. Installing/Removing Optional Power Supply Unit
3. Make sure that the power switch of the backup power
supply unit HK-PSU03 is set to the "O" position
(OFF).
4. Insert HK-PSU03 into PFV-SP3300 and push it by
hand as far as it will go.
5. Secure HK-PSU03 with the two screws which is
removed in step 2.
Handle
PSW
3x8
HK-PSU03
PSW 3x8
Indicator
6. Reinstall the front panel.
7. Connect the power cord, before setting the power
switch to the "I" position (ON).
8. Make sure that the indicator lights.
n
If the indicator does not light, turn off the power and
contact your local Sony Sales Office/Service Center.
Removal Procedure
1. Turn off the power of the power supply unit which you
want to remove. (Set the power switch to "O" posi-
tion.)
2. Unplug the power plug from the wall outlet.
3. Remove the front panel.
4. Remove the screws securing the power supply unit.
5. Pull out the power supply unit from the slot using its
front handle.
6. Install the blank panel.
7. Reinstall the front panel.
1-3 (E)