Sony PFV-SP3300 설치 매뉴얼 - 페이지 9
{카테고리_이름} Sony PFV-SP3300에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony PFV-SP3300 16 페이지. Signal processing unit, backup power supply unit
Sony PFV-SP3300에 대해서도 마찬가지입니다: 운영 매뉴얼 (18 페이지), 운영 매뉴얼 (18 페이지), 유지 관리 매뉴얼 (40 페이지)
페이지 인쇄
Installing Connector Panel (Rear side)
The connector panel must be installed to the slot which
contains the main board.
1. Remove the two screws and remove the blank panel of
the slot which contains the main board.
n
Keep the removed blank panel and two screws.
B 3x5
B 3x5
Blank panel
2. Connect the connector panel to the MB-915 board.
3. Secure the connector panel with the two screws.
MB-915 board
Screws
Connector panel
n
Do not open the slot for an air-cooled effect of this unit.
Attach the blank panel to an empty slot.
PFV-SP3300
1-5. Installing Optional Board
1-5 (E)