Sony SHAKE5 사용 설명서 - 페이지 32

{카테고리_이름} Sony SHAKE5에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SHAKE5 40 페이지. Limited warranty (u.s. only)
Sony SHAKE5에 대해서도 마찬가지입니다: 사양 (2 페이지), 제한 보증 (1 페이지)

페이지 인쇄

The sound skips.

• Wipe the disc clean (page 36).

• Reload the disc.

• Move the unit to a place with no

vibration (e.g., on top of a stable stand).

• Move the speakers away from the unit,

or place them on separate stands. When

you listen to a track with bass sounds at

high volume, the speaker vibration may

cause the sound to skip.

Playback does not start from the first

track.

• Set the play mode to Normal Play

(page 14).

The folder name, track name, file

name and ID3 tag characters do not

appear properly.

• The ID3 tag is not Version 1(1.0/1.1)

and Version 2(2.2/2.3).

• The character code that can be displayed

by this system are as follows:

– Upper cases (A to Z)

– Numbers (0 to 9)

– Symbols (< > * +, [ ] \ _)

Other characters appear as "_".

USB device

Transferring results in an error.

• You are using an unsupported USB

device. Check the information on the

websites about compatible USB devices

(page 30).

• The USB device is not formatted

correctly. Refer to the operating

instructions of the USB device on how

to format.

• Turn off the system and remove the

USB device. If the USB device has a

power switch, turn the USB device off

and then on again after removing it from

the system. Then perform transferring

again.

• If the transferring and erase operations

are repeated multiple times, the file

structure within the USB device

becomes fragmented. Refer to the

operating instructions supplied with the

USB device on how to deal with this

problem.

• The USB device was disconnected or

the power was turned off during

transferring. Delete the partially-

transferred file, and perform

transferring again. If this does not fix the

problem, the USB device may be

broken. Refer to the operating

instructions of the USB device on how

to deal with this problem.

Audio files or folders on the USB

device cannot be erased.

• Check if the USB device is write-

protected.

• The USB device was disconnected or

the power was turned off during the

erase operation. Delete the partially-

erased file. If this does not fix the

problem, the USB device may be

broken. Refer to the operating

instructions of the USB device on how

to deal with this problem.

There is no sound.

• The USB device is not connected

correctly. Turn off the system and

reconnect the USB device, then turn on

the system and check if "USB A" or

"USB B" lights up in the display panel.

There is noise, skipping, or distorted

sound.

• You are using an unsupported USB

device. Check the information on the

websites about compatible USB devices

(page 30).

• Turn off the system and reconnect the

USB device, then turn on the system.

• The music data itself contains noise, or

the sound is distorted. Noise may have

entered during the transferring process.

Delete the file, and try transferring

again.