Sony SRS-X88 사용 설명서 - 페이지 8
{카테고리_이름} Sony SRS-X88에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SRS-X88 28 페이지. Personal audio system
Sony SRS-X88에 대해서도 마찬가지입니다: 시작 매뉴얼 (2 페이지), 사용 설명서 (41 페이지), 서비스 매뉴얼 (40 페이지), 시작 매뉴얼 (2 페이지)
페이지 인쇄
NETWORK button/indicator
Tap to switch the unit to NETWORK
mode.
Tap to use various music services or
listen to music stored in a device on the
home network with the unit.
USB-A button/indicator
Tap to listen to music in a device
connected to the USB A port (
USB-A indicator lights up when tapped.
USB-B button/indicator
Tap to listen to music in a device
connected to the USB B port (
USB-B indicator lights up when tapped.
AUDIO IN button/indicator
Tap to listen to music in a device
connected to the AUDIO IN jack. The
AUDIO IN indicator lights up when
tapped.
Wi-Fi antenna (aerial)
Set upright during Wi-Fi connection as
below.
Swing the left side of the antenna
(aerial) outwards.
Pull out the antenna (aerial).
Rotate the antenna (aerial) 90
degrees clockwise.
Bring up the antenna (aerial).
N-Mark
If your smartphone is NFC-compatible,
touch the smartphone on the N-Mark.
The unit will turn on automatically and
registering (pairing) and BLUETOOTH
connection can be made.
DC IN 19.5 V jack
Connect the AC adaptor (supplied).
AUDIO IN jack
Connect to the headphone jack of a
portable audio device, etc., using a audio
cable (not supplied).
8
GB
WPS button
Press and hold when connecting to a Wi-
Fi network.
Beeps will be heard by pressing and
holding the WPS button for 2 seconds,
which indicates that the unit is ready to
connect to a wireless router.
If your wireless router has a WPS button,
you can use this button to connect to the
A). The
network.
LAN port
Use a LAN cable (not supplied) to
connect the PC or the wireless router.
B). The
USB B port (
Connect a PC using a USB cable (not
supplied).
When connecting a high-resolution
supported Walkman® or Xperia, use the
optional cable.
USB A port (
Connect a USB flash drive directly. When
connecting to an iPhone/iPad/iPod or
Walkman®, use the cable supplied with
the device.
Remote sensor
Reaction indicator
When the unit receives signals from the
supplied remote control, the reaction
indicator (remote sensor) flashes.
Also, the indicator flashes according to
the volume adjustment of the unit.
To enjoy more dynamic sound
Remove the speaker grille on the front of
the unit with the speaker grille detach tool
(supplied).*
Speaker grille detach tool (supplied)
1
*
Keep the removed grille on a flat surface to
prevent distortion.
B)
A)
1