Sony SRS-X88 Operating Instructions Manual - Page 8

Browse online or download pdf Operating Instructions Manual for Stereo System Sony SRS-X88. Sony SRS-X88 28 pages. Personal audio system
Also for Sony SRS-X88: Startup Manual (2 pages), Operating Instructions Manual (41 pages), Service Manual (40 pages), Startup Manual (2 pages)

Sony SRS-X88 Operating Instructions Manual
 NETWORK button/indicator
Tap to switch the unit to NETWORK
mode.
Tap to use various music services or
listen to music stored in a device on the
home network with the unit.
 USB-A button/indicator
Tap to listen to music in a device
connected to the USB A port (
USB-A indicator lights up when tapped.
 USB-B button/indicator
Tap to listen to music in a device
connected to the USB B port (
USB-B indicator lights up when tapped.
 AUDIO IN button/indicator
Tap to listen to music in a device
connected to the AUDIO IN jack. The
AUDIO IN indicator lights up when
tapped.
 Wi-Fi antenna (aerial)
Set upright during Wi-Fi connection as
below.
 Swing the left side of the antenna
(aerial) outwards.
 Pull out the antenna (aerial).
 Rotate the antenna (aerial) 90
degrees clockwise.
 Bring up the antenna (aerial).
 N-Mark
If your smartphone is NFC-compatible,
touch the smartphone on the N-Mark.
The unit will turn on automatically and
registering (pairing) and BLUETOOTH
connection can be made.
 DC IN 19.5 V jack
Connect the AC adaptor (supplied).
 AUDIO IN jack
Connect to the headphone jack of a
portable audio device, etc., using a audio
cable (not supplied).
8
GB
 WPS button
Press and hold when connecting to a Wi-
Fi network.
Beeps will be heard by pressing and
holding the WPS button for 2 seconds,
which indicates that the unit is ready to
connect to a wireless router.
If your wireless router has a WPS button,
you can use this button to connect to the
A). The
network.
 LAN port
Use a LAN cable (not supplied) to
connect the PC or the wireless router.
B). The
 USB B port (
Connect a PC using a USB cable (not
supplied).
When connecting a high-resolution
supported Walkman® or Xperia, use the
optional cable.
 USB A port (
Connect a USB flash drive directly. When
connecting to an iPhone/iPad/iPod or
Walkman®, use the cable supplied with
the device.
 Remote sensor
 Reaction indicator
When the unit receives signals from the
supplied remote control, the reaction
indicator (remote sensor) flashes.
Also, the indicator flashes according to
the volume adjustment of the unit.
To enjoy more dynamic sound
Remove the speaker grille on the front of
the unit with the speaker grille detach tool
(supplied).*
Speaker grille detach tool (supplied)
1
*
Keep the removed grille on a flat surface to
prevent distortion.
B)
A)
1