Sony STR-DA80ES - Fm Stereo / Fm-am Receiver 사용 설명서 - 페이지 20

{카테고리_이름} Sony STR-DA80ES - Fm Stereo / Fm-am Receiver에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony STR-DA80ES - Fm Stereo / Fm-am Receiver 40 페이지. Limited warranty (es products)
Sony STR-DA80ES - Fm Stereo / Fm-am Receiver에 대해서도 마찬가지입니다: 사용 설명서 (39 페이지), 기술적 배경 (38 페이지), 제한 보증 (1 페이지)

페이지 인쇄

Sony STR-DA80ES - Fm Stereo / Fm-am Receiver 사용 설명서

Dolby Surround Setup

Dolby Digital

To obtain the best possible surround sound, first

specify the type of speakers you have connected and

the location of the rear speakers. Then use the test tone

to adjust the speaker volumes to the same level.

POWER

DISPLAY

VIDEO 1

VIDEO 2

S-VIDEO

VIDEO

SPEAKERS

OFF

PRESET TUNING

–

SHIFT

FM/AM

PHONES

Specifying the speaker type and the

location of the rear speakers

Press SET UP repeatedly to select SPEAKER

SETUP.

Use the digital processing control buttons ( V / v )

to select the parameter to be set and use the

buttons ( B / b ) to select the setting.

FRONT SP. (front speaker)

• If you connect large speakers that will effectively

reproduce bass frequencies, select "LARGE."

• When a Dolby Digital sound source (indicated by the

lighting of the DISCRETE indicator) produces an

inadequate surround effect, or when cracking occurs

in the sound output, select "SMALL" to activate the

Dolby Digital (AC-3) bass redirection circuitry and

output the front channel bass frequencies from the

subwoofer or other "LARGE" speakers.

CENTER SP. (center speaker)

• If you connect large speakers that will effectively

reproduce bass frequencies, select "LARGE."

• When a Dolby Digital sound source (indicated by the

lighting of the DISCRETE indicator) produces an

inadequate surround effect, or when cracking occurs

in the sound output, select "SMALL" to activate the

Dolby Digital (AC-3) bass redirection circuitry and

output the center channel bass frequencies from the

front speakers, subwoofer or other "LARGE"

speakers.

• If you do not connect the center speaker, select

"NO."

Digital processing

control buttons

SET UP

SUR

PANEL

UP/DOWN

INDEX

VIDEO 3

LD/DVD

TV/DBS

TAPE

DAT/MD

TUNER

PHONO

{MEMORY}

AUDIO

VIDEO 3

FM MODE

TUNING

EQUALIZER

DPC

SET UP

BALANCE

INPUT

–

MODE

•

BAND

MODE

SOUND FIELD

GENRE

MODE

DIRECT

BASS

INPUT

PASS

BOOST

MODE

REAR SP. (rear speaker)

• If you connect large speakers that will effectively

reproduce bass frequencies, select "LARGE."

• When a Dolby Digital sound source (indicated by the

lighting of the DISCRETE indicator) produces an

inadequate surround effect, or when cracking occurs

in the sound output, select "SMALL" to activate the

Dolby Digital (AC-3) bass redirection circuitry and

output the rear channel bass frequencies from the

subwoofer or other "LARGE" speakers.

• If you do not connect rear speakers, select "NO."

MUTING

MASTER VOL

REAR SP. (rear speaker place)

This parameter lets you specify the location of your

FUNCTION

rear speakers for proper implementation of the Digital

Cinema Sound VIRTUAL REAR SHIFT and VIRTUAL

MULTI REAR sound fields. Refer to the illustration

below.

• Set to SIDE if the location of your rear speakers

corresponds to section A.

• Set to BEHIND if the location of your rear speakers

corresponds to section B.

This setting affects only the VIRTUAL REAR SHIFT

and VIRTUAL MULTI REAR sound fields.

Note that this parameter does not appear when the

REAR SP. (rear speaker) parameter is set to "NO."

SUB WOOFER (subwoofer selection)

• If you connect a subwoofer, select "YES" to output

the LFE (low frequency extension) channel from the

subwoofer.

• If you do not connect a subwoofer, select "NO." This

activates the Dolby Digital (AC-3) bass redirection

circuitry and outputs the LFE signals from other

speakers.

90°

45°

20°