Sony XPlod MEX-BT5000 사용 설명서 - 페이지 14

{카테고리_이름} Sony XPlod MEX-BT5000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony XPlod MEX-BT5000 28 페이지. Cd player xplod bluetooth
Sony XPlod MEX-BT5000에 대해서도 마찬가지입니다: 설치/연결 (2 페이지), 지침 및 운영 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 운영 지침 (2 페이지), 사양 (2 페이지), 설치/연결 (2 페이지), (포르투갈어) 사양 (1 페이지)

페이지 인쇄

1. Pairing this Unit with a Bluetooth

E:\Working\2693038211\269303821MEXBT5000U\01US02CD-U.fm

01US+00COV-U.book Page 14 Thursday, April 27, 2006 11:03 PM

Tips

• Preset Dial also allows you to make a call by

pressing a number button twice after pressing

(CALL).

• On the "Dialed Calls," "Received Calls" and "Preset

Dial" menus, you can make a call by pressing

(CALL) while the phone number is displayed.

Presetting the volume of ring tone

and talker's voice

You can preset the volume level of the ring tone

and talker's voice.

To adjust the ring tone:

Rotate the joystick while the phone is ringing.

"Ring Vol" appears and ring tone volume is set.

To adjust the talker's voice:

Rotate the joystick during a call. "Talk Vol"

appears and the talker's voice volume is set.

Sending DTMF (Dual Tone Multiple

Frequency) tones

You can send DTMF tones.

To send DTMF tones, use the joystick or press

the required number buttons (0 – 9,

the card remote commander during a call.

Receiving calls

When receiving a call, ring tone is output from

your car speakers.

For details on the settings for receiving a call and

during a call, see "Setting a handsfree device" on

page 15.

When receiving a call, press (CALL),

(MENU) or (Bluetooth).

The phone call starts.

To reject a call

Press (OFF).

Tips

• If you set "Auto Answer" to on, the phone call is

automatically started in the set time (page 15).

• If (CALL) is pressed during a call, the handsfree

function is deactivated, and the microphone and

speaker of the cellular phone are activated. In this

case, the Bluetooth connection may become

disconnected depending on the cellular phone.

Ending calls

Press (OFF).

If the other party ends the call, talk time

appears for a few seconds.

Note

Even if the call is ended, the Bluetooth connection is

not canceled.

Using the Phonebook

Receiving phonebook data from a

cellular phone

1 Select "Phone Settings" from the Bluetooth

function menu.

2 Select "Receive PB."

"Waiting..." appears.

3 Send the phonebook data by operating the

cellular phone.

"Data Receiving..." appears while receiving

the phonebook data.

"Complete" appears when receiving is

complete.

Storing the numbers from "Dialed

Calls" or "Received Call"

1 Select "Dialed Calls" or "Received Call" from

) on

the CALL menu.

2 Select the phone number to store, then select

"PB Memory."

The "Contact Name" display appears.

3 Input a name.

Up to 20 characters can be input.

4 Select "Save?" c "yes."

Note

Up to 50 phone numbers can be stored in the

Phonebook. If you try to register more than 50

numbers, "Memory Full" appears.

Deleting from the phonebook

(Bluetooth)

(MENU)

1 Select "Phonebook" c "Contact List" from the

(CALL)

CALL menu.

2 Select the phone number to delete.

3 Select "Delete" c "yes."

To clear all phonebook data, select "Delete All"

in step 1.

Changing a name in the phonebook

1 Select "Phonebook" c "Contact List" from the

CALL menu.

2 Select the name to change.

3 Select "Edit Name," then input a new name.

Using the Preset Dial

Storing the Preset Dial

You can store a phone number in the phonebook

to the Preset Dial.

masterpage:Left

MEX-BT5000

2-693-038-21 (1)