Sony XPlod MEX-BT5000 사용 설명서 - 페이지 16
{카테고리_이름} Sony XPlod MEX-BT5000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony XPlod MEX-BT5000 28 페이지. Cd player xplod bluetooth
Sony XPlod MEX-BT5000에 대해서도 마찬가지입니다: 설치/연결 (2 페이지), 지침 및 운영 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 운영 지침 (2 페이지), 사양 (2 페이지), 설치/연결 (2 페이지), (포르투갈어) 사양 (1 페이지)
페이지 인쇄
E:\Working\2693038211\269303821MEXBT5000U\01US02CD-U.fm
01US+00COV-U.book Page 16 Thursday, April 27, 2006 11:03 PM
Speaker Sel*
(Speaker Select)
4
To set the front speaker to output the ring tone,
dial-tone and other party's voice.
– "FR-L" (
): to output from the left channel of
z
front speakers.
– "FR-R": to output from the right channel of
front speakers.
– "Front": to output from both front speakers.
Security
To lock the personal information in the
following menus by setting a 4-digit password
(page 13).
"Dialed Calls," "Received Calls," "Phonebook,"
"Preset Dial," "Receive PB"
If you set the security, "Security Locked"
appears when the above menus are operated.
To unlock the security, select "Unlock" and
input the password number.
*1 If "Security" is set, "Security Locked" appears and
operation is not possible.
*2 If a character that cannot be displayed on this unit
is used, it is not displayed correctly.
*3 Depending on the cellular phone, this unit's ring
tone may be output even if set to "Cellular."
*4 Configurable during a call.
Note
If you select "Initialize" in the Security setting, all
stored data is deleted ("Dialed Calls," "Received Calls,"
"Phonebook" and "Preset Dial").
Deleting the registration of a
connected device
1
Press (Bluetooth).
The Bluetooth function menu appears.
2
Select "Connectivity" c "Handsfree
Devices" or "Audio Devices."
The list of registered devices appears.
3
Select the device to delete.
4
Select "Delete" c "yes."
To clear all devices in the selection list, select
"Delete All" in step 4.
Auto connection function
If the ignition switch is set to the ACC position,
this unit reconnects automatically to the last
connected Bluetooth device.
16
Other functions
Adjusting menu items — MENU
1
Press (MENU).
2
Push the joystick up/down until the
desired menu item appears, then push
it right.
The items changes as follows:
Setup y Display y Receive Mode
y Sound
3
Push the joystick up/down until the
desired setting item appears, then
push it right.
The digital indication moves to the right
(setting selection) side.
4
Push the joystick up/down to select
the setting, then press it.
The setting is complete.
5
Press (MENU).
The display returns to normal play/reception
mode.
Note
Displayed items will differ, depending on the source
and setting.
Tips
• You can go to the next menu level by pressing the
joystick.
• In step 5, push the joystick left until "EXIT" appears,
then press the joystick, instead of pressing (MENU).
• You can enter the Sound setting menu directly by
pressing (SOUND) on the card remote commander.
The following items can be set (follow the page
reference for details):
"
" indicates the default settings.
z
Setup
Clock Adjust (page 4)
Beep
To set "on" (
) or "off."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "NORM" (
): to use the rotary commander in
z
the factory-set position.
– "REV": when you mount the rotary
commander on the right side of the steering
column.
AUX Audio*
1
To turn the AUX source display "on" (
"off" (page 19).
Version
To display the unit's firmware version.
masterpage:Left
) or
z
MEX-BT5000
2-693-038-21 (1)