Cisco ASR 9910 매뉴얼 - 페이지 22

{카테고리_이름} Cisco ASR 9910에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 9910 44 페이지. Replacing cisco asr 9000 series router components

Removing an AC or DC Power Tray from a Cisco ASR 9000 Series Router

Figure 14: Removing the Front Power Tray Bezel on the Cisco ASR 9922 Router

Step 5

For the Cisco ASR 9912 Router, the vented power tray bezel is a base chassis accessory that snaps onto the

front of the power system. comes with ball studs already installed. Remove it by pulling it away from the

chassis

(Figure

Step 6

Loosen and remove the four screws (two screws at each end) that attach the power tray to the chassis.

Step 7

Loosen the two captive screws (one per ejector lever) to release the ejector levers. The Removing a Power

Tray—Version 1 Power Tray figure shows the process for the version 1 power trays, and the figure Removing

a Power Tray –Version 2 Power Tray shows the process for the version 2 power trays. The process for version

3 power trays is similar to the process for version 2 power trays, as shown in figure Removing a Power Tray

–Version 2 Power Tray .

Figure 15: Removing a Power Tray Version 1 Power Tray (Cisco ASR 9010 Router Shown)

Replacing Cisco ASR 9000 Series Router Components

1).

Replacing Cisco ASR 9000 Series Router Components