Cisco ASR 9910 Podręcznik - Strona 22
Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt sieciowy Cisco ASR 9910. Cisco ASR 9910 44 stron. Replacing cisco asr 9000 series router components
Drukuj stronę- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Removing an AC or DC Power Tray from a Cisco ASR 9000 Series Router
Figure 14: Removing the Front Power Tray Bezel on the Cisco ASR 9922 Router
Step 5
For the Cisco ASR 9912 Router, the vented power tray bezel is a base chassis accessory that snaps onto the
front of the power system. comes with ball studs already installed. Remove it by pulling it away from the
chassis
(Figure
Step 6
Loosen and remove the four screws (two screws at each end) that attach the power tray to the chassis.
Step 7
Loosen the two captive screws (one per ejector lever) to release the ejector levers. The Removing a Power
Tray—Version 1 Power Tray figure shows the process for the version 1 power trays, and the figure Removing
a Power Tray –Version 2 Power Tray shows the process for the version 2 power trays. The process for version
3 power trays is similar to the process for version 2 power trays, as shown in figure Removing a Power Tray
–Version 2 Power Tray .
Figure 15: Removing a Power Tray Version 1 Power Tray (Cisco ASR 9010 Router Shown)
Replacing Cisco ASR 9000 Series Router Components
22
1).
Replacing Cisco ASR 9000 Series Router Components