Cisco ATA 191 시작하기 - 페이지 3

{카테고리_이름} Cisco ATA 191에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 191 8 페이지. Analog telephone adapter
Cisco ATA 191에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 관리 매뉴얼 (4 페이지), 사용자 설명서 (10 페이지), 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (13 페이지), 설정 매뉴얼 (6 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (30 페이지)

Get Started with Your New ATA

Item

Problem Report Tool (PRT) Button

Problem Report Tool (PRT) LED

ATA 191 Back Panel

The back panel of your ATA has several ports used to connect your device and to power it. The back panel

also has the reset button for resetting the device to the factory settings.

Figure 2: ATA 191 Back Panel

The following table describes the ports that are located on the back panel of your ATA.

Table 2: ATA 191 Back Panel Ports

Port or Button

RESET

PHONE 1

PHONE 2

NETWORK

DC 5V POWER

Description

Press this button to create a problem report using the Problem Report

Tool.

This is not a power button. When you press this button, a

Note

problem report is generated and uploaded to a server for the

system administrator.

Flashing amber: The PRT is preparing the data for the problem report.

Fast Flashing amber: The PRT is sending the problem report log to

the PRT server.

Solid green for five seconds, then off: The PRT report was sent

successfully.

Flashing red: The PRT report failed. Press the PRT button to turn the

LED off. Once it is off, another press triggers a new PRT report.

Description

To restart the ATA, use a paper clip or similar object to press this button

briefly.

To restore the factory default settings, press and hold for 10 seconds.

Use an RJ-11 phone cable to connect an analog phone or fax machine.

Use an RJ-11 phone cable to connect a second analog phone or fax

machine.

Use an Ethernet cable to connect to the network.

Use the provided power adapter to connect to a power source.

ATA 191 Back Panel

Get Started with Your New ATA