Cisco C1101-4PLTEPWx 설치 및 연결 - 페이지 3

{카테고리_이름} Cisco C1101-4PLTEPWx에 대한 설치 및 연결을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C1101-4PLTEPWx 27 페이지. This chapter describes how to install and connect cisco 1000 series integrated services router (isr) to lan and wan networks.

페이지 인쇄

Install and Connect the Router

Note

When mounting Cisco 1000 ISRs on a rack, ensure that there is ample surrounding space. This ensures more

heat removal, which in turn will enable the surrounding air temperature to stay within the specified operating

conditions.

Attach the Brackets for C111x

This procedure describes how to attach the brackets on the router chassis:

Step 1

Secure the brackets to the router chassis (on the left) as shown in figure below:

Example:

Figure 1: Bracket Installation for Left-Side Mounting - C111x

Step 2

Similarly, secure the brackets on the right-side of the chassis for mounting the router.

Attach the Rack Mounting Brackets for C112x

This procedure describes how to attach the brackets on the router chassis:

Step 1

Remove the 6 screws from the bottom of the chassis.

Step 2

Place the platform into the bottom tray.

Step 3

Secure the original screws from the bottom side of the tray.

Example:

Attach the Brackets for C111x

Install and Connect the Router