Cisco C1101-4PLTEPWx 설치 및 연결 - 페이지 4
{카테고리_이름} Cisco C1101-4PLTEPWx에 대한 설치 및 연결을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C1101-4PLTEPWx 27 페이지. This chapter describes how to install and connect cisco 1000 series integrated services router (isr) to lan and wan networks.
페이지 인쇄
Mount the Router
Figure 2: Bracket Installation for C1121-4Px, C1126-8PLTEP and C1128-8PLTEP
Mount the Router
Before mounting the router on to the rack, refer to the following safety warning statements:
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 1.75 in. (4.4
cm). Statement 1076.
Warning
• To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Install and Connect the Router
4
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
heaviest component at the bottom of the rack.
unit in the rack. Statement 1006.
Install and Connect the Router