Cisco CAB-SM-LCSC-1M 설치 참고 사항 - 페이지 23

{카테고리_이름} Cisco CAB-SM-LCSC-1M에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco CAB-SM-LCSC-1M 36 페이지. Passive optical system
Cisco CAB-SM-LCSC-1M에 대해서도 마찬가지입니다: 설치 참고 사항 (42 페이지)

페이지 인쇄

Connecting Cables to the CWDM 8-Channel Multiplexer/Demultiplexer Module

Make sure that the CWDM GBIC transceiver color code or CWDM SFP transceiver color code matches

Note

the color code of the OADM port to which it is connected.

To connect cables to a CWDM 8-channel multiplexer/demultiplexer module, follow these steps (see

Figure

Insert the CWDM GBIC or CWDM SFP transceivers into the appropriate modules on your switch or

Step 1

router system if you have not already done so. For more information on installing CWDM GBIC

transceivers and SFP transceivers, refer to the Cisco CWDM GBIC and CWDM SFP Installation Note.

Note

Warning

Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do

not view directly with optical instruments. Viewing the laser output with certain optical instruments

(for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye

hazard. Statement 1056

78-16565-02

19):

Clean all fiber-optic plugs on the cables before inserting the plugs into the fiber-optic

connectors.

Always use single-mode fiber-optic patch cables to connect the 8-channel

multiplexer/demultiplexer ports to the CWDM GBIC transceivers and CWDM SFP transceivers.

Connecting the CWDM Passive Optical System to Your System

Cisco CWDM Passive Optical System Installation Note