Cisco Catalyst 2960-XR 시작하기 매뉴얼 - 페이지 13

{카테고리_이름} Cisco Catalyst 2960-XR에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-XR 25 페이지.
Cisco Catalyst 2960-XR에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (34 페이지), 하드웨어 매뉴얼 (20 페이지)

페이지 인쇄
Cisco Catalyst 2960-XR 시작하기 매뉴얼
Stack Cabling
These figures show the switches stacked in a vertical rack or on a table. The connections are redundant. A Catalyst 2960-X switch
is shown in the examples, the Catalyst 2960-XR switch can be stacked in the same way.
Figure 2: Stacking Switches with the 0.5-meter FlexStack Cable
Figure 3: Stacking Switches with 0.5-meter and 3-meter FlexStack Cables

Installing the Switch

This section describes basic 19-inch rack-mounting. See the hardware installation guide for other optional bracket information. For
alternate mounting procedures, such as installing the switch in a 24-inch rack or on a wall, and for additional cabling information,
see the hardware installation guide on Cisco.com.
Tools and Equipment
Obtain these necessary tools and equipment:
• A number-2 Phillips screwdriver to rack-mount the switch.
13