Cisco Catalyst 2960-XR 시작하기 매뉴얼 - 페이지 15

{카테고리_이름} Cisco Catalyst 2960-XR에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-XR 25 페이지.
Cisco Catalyst 2960-XR에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (34 페이지), 하드웨어 매뉴얼 (20 페이지)

페이지 인쇄

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions

Warning

to ensure that the system remains stable. The following guidelines are provided to ensure your safety: -

This unit should be mounted at the bottom of the rack if it is the only unit in the rack. - When mounting

this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at

the bottom of the rack. - If the rack is provided with stabilizing devices, install the stabilizers before

mounting or servicing the unit in the rack. Statement 1006

Warning

Class 1 laser product. Statement 1008

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the

Warning

absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority

or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Warning

To prevent the system from overheating, do not operate it in an area that exceeds the maximum

recommended ambient temperature of: 113°F (45°C). Statement 1047

To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 inches (7.6

Warning

cm). Statement 1076