Cisco Catalyst 7500 Series 구성 매뉴얼 - 페이지 40

{카테고리_이름} Cisco Catalyst 7500 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 7500 Series 50 페이지. Chassis interface board
Cisco Catalyst 7500 Series에 대해서도 마찬가지입니다: 데이터시트 (11 페이지), 문제 해결 매뉴얼 (11 페이지), 매뉴얼 교체 (40 페이지)

페이지 인쇄
Cisco Catalyst 7500 Series 구성 매뉴얼
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

Setting up the SSID

Voice and data must be on separate SSIDs to prioritize voice traffic. The voice SSID must be
set to Platinum for Quality of Service and the data SSID must be set to Silver for Quality of
Service.
1
From the main menu, click WLANs.
2
In the WLANs screen, select Create New from the drop down list and click Go.
3
Enter the Profile Name and SSID.
4
Click the Apply button twice.
5
Select the Profile Name for the voice SSID.
6
Under the General tab, verify the Radio Policy corresponds to the Spectralink Wireless
Telephone configuration.
○ When Radio Policy is configured for 802.11b/g only, the handsets should be configured
for 2.4 GHz in the handsets.
○ When Radio Policy is configured for 802.11a only, the handsets should be configured
for 5 GHz in the handsets.
○ When Radio Policy is configured for 802.11g only, the handsets should be configured
for 2.4 GHz in the handsets.
○ When Radio Policy is configured for All, the handsets should be set to Auto in the 87-
series and both 2.4 GHz and 5 GHz radios should be enabled in the 84-series.
7
For Status, select the Enabled check box.
721-1001-000-AH.docx
December 2016
40