Cisco Catalyst 7500 Series Посібник з конфігурації - Сторінка 40

Переглянути онлайн або завантажити pdf Посібник з конфігурації для Мережеве обладнання Cisco Catalyst 7500 Series. Cisco Catalyst 7500 Series 50 сторінок. Chassis interface board
Також для Cisco Catalyst 7500 Series: Технічний паспорт (11 сторінок), Посібник з усунення несправностей (11 сторінок), Посібник із заміни (40 сторінок)

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

Setting up the SSID

Voice and data must be on separate SSIDs to prioritize voice traffic. The voice SSID must be

set to Platinum for Quality of Service and the data SSID must be set to Silver for Quality of

Service.

From the main menu, click WLANs.

In the WLANs screen, select Create New from the drop down list and click Go.

Enter the Profile Name and SSID.

Click the Apply button twice.

Select the Profile Name for the voice SSID.

Under the General tab, verify the Radio Policy corresponds to the Spectralink Wireless

Telephone configuration.

○ When Radio Policy is configured for 802.11b/g only, the handsets should be configured

for 2.4 GHz in the handsets.

○ When Radio Policy is configured for 802.11a only, the handsets should be configured

for 5 GHz in the handsets.

○ When Radio Policy is configured for 802.11g only, the handsets should be configured

for 2.4 GHz in the handsets.

○ When Radio Policy is configured for All, the handsets should be set to Auto in the 87-

series and both 2.4 GHz and 5 GHz radios should be enabled in the 84-series.

For Status, select the Enabled check box.

721-1001-000-AH.docx

December 2016