Cisco Cisco ASA Series 시작하기

{카테고리_이름} Cisco Cisco ASA Series에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco ASA Series 31 페이지.
Cisco Cisco ASA Series에 대해서도 마찬가지입니다: 마운트 및 연결 (12 페이지), 마운트 및 연결 (6 페이지)

페이지 인쇄
Cisco Cisco ASA Series 시작하기

Getting Started

This chapter describes how to get started with your Cisco ASA.
•
•
•
•
•
•
•
Access the Console for the Command-Line Interface
For initial configuration, access the CLI directly from the console port. Later, you can configure remote access
using Telnet or SSH according to
then accessing the console port places you in the system execution space.
Note
For ASAv console access, see the ASAv quick start guide.
Access the Appliance Console
Follow these steps to access the appliance console.
Procedure
Step 1
Connect a computer to the console port using the provided console cable, and connect to the console using a
terminal emulator set for 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
See the hardware guide for your ASA for more information about the console cable.
Access the Console for the Command-Line Interface, page 1
Configure ASDM Access, page 9
Start ASDM, page 15
Factory Default Configurations, page 16
Work with the Configuration, page 24
Apply Configuration Changes to Connections, page 28
Reload the ASA, page 28
CLI Book 1: Cisco ASA Series General Operations CLI Configuration Guide, 9.5
Management
Access. If your system is already in multiple context mode,
1