Cisco Cisco ASA Series Aan de slag

Blader online of download pdf Aan de slag voor {categorie_naam} Cisco Cisco ASA Series. Cisco Cisco ASA Series 31 pagina's.
Ook voor Cisco Cisco ASA Series: Monteren en aansluiten (12 pagina's), Monteren en aansluiten (6 pagina's)

Pagina afdrukken

Getting Started

This chapter describes how to get started with your Cisco ASA.

•

Access the Console for the Command-Line Interface

For initial configuration, access the CLI directly from the console port. Later, you can configure remote access

using Telnet or SSH according to

then accessing the console port places you in the system execution space.

Note

For ASAv console access, see the ASAv quick start guide.

Access the Appliance Console

Follow these steps to access the appliance console.

Procedure

Step 1

Connect a computer to the console port using the provided console cable, and connect to the console using a

terminal emulator set for 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.

See the hardware guide for your ASA for more information about the console cable.

Access the Console for the Command-Line Interface, page 1

Configure ASDM Access, page 9

Start ASDM, page 15

Factory Default Configurations, page 16

Work with the Configuration, page 24

Apply Configuration Changes to Connections, page 28

Reload the ASA, page 28

CLI Book 1: Cisco ASA Series General Operations CLI Configuration Guide, 9.5

Management

Access. If your system is already in multiple context mode,