Digitone Call Blocker 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Digitone Call Blocker에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitone Call Blocker 13 페이지. Automatically blocks and routes screened calls with caller id
Digitone Call Blocker에 대해서도 마찬가지입니다: 코드 목록 (2 페이지)

페이지 인쇄

After Hours Mode - Programmable Time Feature Introduction

During a certain time of the day or night you can set the Call Blocker to enter into After Hours Mode.

This mode is designed to keep phones connected to the TEL phone port from ringing and allow calls to

be answered by an optional answer machine when it is enabled on a daily basis. If you run a business,

then you would use this After Hours Mode so all callers can leave a message. If your work or dinner

times are different from regularly scheduled times, you would use this mode so that you can get your

sleep or to completely avoid disruptive callers. During After Hours Mode, VIP callers can ring through

at any time regardless of the After Hours time settings. Invited callers can only ring through normally

when After Hours Mode is not enabled.

To use the After Hours Mode, you must first understand military time presented here. The clock on the

Call Blocker display converts the telephone company's supplied clock data into either AM or PM time. If

the morning hours are 1:00am = 0100 hours, 2:00am = 0200 hours, etc. until noon = 1200 hours and

then the afternoon hours are 1:00pm = 1300 hours, 2:00pm = 1400 hours, etc. until midnight = 0000

hours. So, to set a time for a business after hours beginning in the early evening until the next morning

or 5:00pm to 8:00am you would use the military time of 1700 and 0800 as the two numbers for your

After Hours settings. To set a time for dinner in the evening from 6:00pm to 8:00pm you would use the

times of 1800 and 2000. To set a time for early morning until lunch time or 1:00am to 12:00pm you

would use 0100 and 1200.

After Hours Mode Settings

Step 1) Monday thru Friday – Start & End Times

Using military time as shown above, set this feature on by enter programming: press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt

for "Enter Code" displays enter Code 82, then "Enter Start Time" displays, enter the Start time of day

(Ex. 1700, 5:00pm from example above), display shows function. Next, when the prompt for "Enter

Code" displays enter Code 83, then "Enter End Time" displays, enter your End time of day (Ex. 0800,

8:00am from example above), display shows function.

Step 2) Monday thru Friday - Enable

To enable Monday thru Friday, when the prompt for "Enter Code" displays, enter Code 84, display shows

function.

To disable Monday thru Friday, when the prompt for "Enter Code" displays enter Code 85,

display shows function.

Step 3) Saturday & Sunday - Enable

If you want the same time interval to work during Saturday and Sunday, when the prompt for "Enter

Code" displays, enter Code 86, display shows function.

To disable this feature, when the prompt for

"Enter Code" displays, enter Code 87, display shows function.

Step 4) After Hours Mode ON or OFF – (Code 80/81)

To enable After Hours Mode, enter programming: when the prompt for "Enter Code" displays, enter

Code 81, display shows function. To turn this feature Off, when the prompt for "Enter Code" displays

enter Code 80, display shows function. Note: To enable After Hours Mode you must first enter Start

and End times (above) and enable day periods (M-S).

Anonymous, Out of Area, Private and Unknown (Code 72)

If you want to have an answer machine or your voice mail take these types of calls and not ring your

phone connected to the Call Blocker you can program in Code 72 (OPX override). Note that Code 72

allows the OPX calls through to the Line only, not the TEL phone port. To enable OPX Override, enter

programming: press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays enter Code 72, display shows function. If

you want to restore Blocking of OPX calls later, enter programming: press and hold the Program Button

for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays, enter code 73, display shows function.