Digitone Call Blocker 10 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Digitone Call Blocker 10에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitone Call Blocker 10 13 페이지. Automatically blocks and routes screened calls with caller id
페이지 인쇄Standard Caller ID Display
Automatic Caller ID Call Routing
Caller ID service from your phone company
is required for Digitone's Call Blocker to
work. The first call to your Call Blocker unit
will initialize the Clock and Date to the
current date and time. Automatic call
routing will begin to work right after the
first call when Caller ID information is
displayed.
Note that during Daylight
Savings
Time
changes,
the
phone
company is responsible for updating their
clock data when delivering the caller ID
information.
Clearing Display
To delete a single number from Call History, use the Up or Down arrow keys to select the number you
want to remove. Notice the number has dashes between the digits, Ex. 602-555-1234, Press and hold the
Block Button for 3 seconds, then see "Release Button". Release the button to clear that displayed call.
To Remove the entire Call History, if a number has dashes between the digits, wait until the dashes
are removed, Ex. 6025551234 and only the number shows, then Press and hold the Block Button for 3
seconds, you will then see "Release Button". "CID List Deleted" will then display, clearing all call history.
Viewing Call History
The left Up arrow button displays the previous calls or Top of List. The right
button Down arrow button displays the last call or End of List. When Call History starts to fill up with
calls, you can jump to the Top of List or the End of List by pressing and holding the Up arrow key to
go to the Top of List or pressing and holding the Down arrow key to go to the End of List.
Caller ID Display Buttons
The display is normally in Protected Mode, Ex. 6025555555, shown
on the display to prevent accidental number entries to a list. To add Blocked, Invited or VIP list entries,
you must use the Up or Down viewing buttons to select a displayed number which will then show the
numbers with dashes between the digits, Ex. 602-555-5555. This allows you to add a number to a list.
Blocking Callers
can be enabled using the Up or Down viewing buttons and pressing the Block
button Twice quickly on the front panel. "NBR Blocked" will display and the light indicator will flash to
show that call is now on the Blocked Call List. When a blocked caller calls in, the caller ID will display
their number and "Blocked" with the light flashing to show the call is being answered and hung up on.
Inviting Callers
can be enabled using the Up or Down viewing buttons then, press and hold the
Invite button for one second on the front panel and you will then see "Release Button". Release the
button and you see "NBR Invited". The light indicator will flash to show that call is now on the
Invited Call List. When an invited caller calls in, the caller ID will display their number and "Invited".
Inviting VIP Callers
can be enabled using the Up or Down viewing buttons and pressing the Invite
button Twice quickly on the front panel. "NBR VIP" will display and the light indicator will flash to
show that call is now on the VIP Call List. When a VIP caller calls in, the caller ID will display their
number and "VIP".
3