Digitone Call Blocker 10 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Digitone Call Blocker 10에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitone Call Blocker 10 13 페이지. Automatically blocks and routes screened calls with caller id

페이지 인쇄

Programming Numbers - Invited, VIP and Blocked

Global Invite (Factory Default) Invites all callers who display a phone number

You can invite all callers who display a phone number and yet block a single number or area code. This

one command will allow all Invited callers who display a phone number to ring through to the TEL phone

port and all other devices connected directly to the phone line. To do this, enter programming with the

Program Button. Press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays enter code 96 # *, display shows function.

All callers in this list are considered Invited, but not VIP callers who are in a separate list.

Inviting VIP Callers - "I want to invite my family & friends to ring through at any time."

You can program in specific VIP callers who can ring through at any time by using the Program Button on

the front panel. To enable this feature, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter Code 60 to

store a number of your VIP callers followed by the 10 digit number, then the * key. Example for a VIP

number enter: Code 60, 602 555 1212 *, display shows function. Store up to 30 numbers.

Inviting Area Codes

You can program in specific Invited area codes using the Program Button on the front panel. To enable

this feature, press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays enter Code 50 to store an area code

followed by the # key 7 times, then the * key.

The # key is used as a wildcard replacement for any

number. Example for Invited area codes enter: Code 50, 602 ### #### *, display shows function.

Inviting Callers within a Blocked Area Code

You can program in specific Invited callers within a blocked area code using the Program Button on the

front panel. To enable this feature, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter Code 52 to

store a number followed by the * key. Example for an Invited caller in a blocked area code enter: Code

52, 602 555 1212 *, display shows stored function. Store up to 10 numbers for one or more area codes.

Blocking Individual Callers

To Block specific individual callers, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter Code 40 to

store a number of your Blocked caller followed by the 10 digit number, then the * key. Example for a

Blocked number enter: Code 40, 602 555 1212 *, display shows function. Store up to 80 numbers.

Blocking Area Codes

To Block specific area codes, press and hold the Program Button for 3 seconds until you see "Program

Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays enter Code 40 to store an area

code followed by the # key 7 times, then the * key.

The # key is used as a wildcard replacement for

any number. Example for Blocked area code enter: Code 40, 602 ### #### *, display shows function.

Area codes are displayed as just the area code and included in the 80 number limit stored.

Deleting Invited, VIP or Blocked Numbers

To delete a single number you have stored, enter programming: press and hold the Program Button

for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter Code 98, enter the phone number you want to delete followed by the * key. Example for

deleting a number enter: Code 98, 602-555-1212 *, display shows function.