Digitone ProSeries II Call Blocker 운영 매뉴얼 - 페이지 3
{카테고리_이름} Digitone ProSeries II Call Blocker에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitone ProSeries II Call Blocker 17 페이지. Automatically blocks and routes screened calls using caller id with back lighted display
페이지 인쇄
Caller ID service from your phone company is required for Digitone's
ProSeries
Call Blocker to work. All calls displaying a valid phone number (except
II
for Out of Area or Private) will ring the phones connected to the TEL phone port with
Caller ID repeated. However, blocked calls will not ring the phones connected to the
TEL port. Extension phones connected directly to the phone service will ring once on
blocked calls. Digitone recommends using a Cordless phone system to distribute rings.
Entering (Block) Calls Remotely Using Your Phone
You can enter the LAST caller into the Caller Lists by dialing * 1 # to Invite, * 2 # to
Block, or * 3 # for VIP after a call. You will then hear 2 confirmation beeps in the
phone's speaker. See the DPCB display screen to verify entries when needed.
Blocking Calls In Progress
will show "Release Button".
entered into the Blocked Caller List.
Block
RED
Button - Blocking Numbers
Blocked Callers can be entered by pressing and holding the Block button on the front
panel. "NBR Block Saved" will display and the red LED indicator will flash to show
that call is now on the Blocked Call List. Alternatively, you can enter the LAST call
into the Blocked Caller List remotely while on the phone by dialing * 2 # to Block that
call. You will hear two confirmation beeps in the phone's speaker.
Block
RED
Button – Blocking Names
This feature works with the Block button in Call History. Block up to 50 individual
names. Tap the Block button once quickly on the front panel on the selected Name
you want to block. "Save Name Block?" will show on the display. To store that
name, tap the Block button again to Confirm.
Invite
GREEN
Button (or Unblock) - Numbers
Invited Callers, store up to 80 numbers, can be entered pressing and holding the
Invite button on the front panel for one second until you see "Release Button"
displayed. Release the button and you will see "NBR Invite Saved". When an invited
caller calls in, the caller ID will display their number and "Invited". Use this process to
override or Unblock ANY number that was blocked in Call History.
Invite
GREEN
Button –
Invited VIP Callers, store up to 80 numbers, can be entered by pressing the Invite
button Twice quickly on the front panel. "NBR VIP Saved" will display and the
caller ID will display their number and "VIP".
number that is blocked as Out of Area, Private or associated with a blocked Name.
Delete Entry
BLUE
To delete a single number from Call History, Tap Delete Entry Button Once, "Confirm
Delete?" will then show. To clear that displayed call, tap Delete Entry Button again.
ProSeries II Call Blocker Operation
- Simply Press & Hold the Block Button and the display
Release the button and the call will be stopped and
Front Panel Buttons
VIP
Numbers
(right) Button – Numbers
- Last Call Remote Entry
Use this process to override ANY
2