ACU-RITE SENC 150 설치 매뉴얼 - 페이지 4
{카테고리_이름} ACU-RITE SENC 150에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE SENC 150 4 페이지. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
ACU-RITE SENC 150에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 참조 매뉴얼 (20 페이지), 설치 매뉴얼 (6 페이지), 사용 설명서 (12 페이지)
페이지 인쇄SENC 150
Encoder button up ...
Slide brackets back
away from the
reading head and
cable
•
Use allen wrench from set screw adjustment to
slide alignment brackets away from the reading
head.
•
Remove alignment brackets and save.
•
Move the axis through its full travel. Confirm that
the assembly does not interfere with the machine
movement.
Installation Manual 385076-000
Encoder Installation Manual For: Chevalier FSG-2A 1224
•
Twist brackets
45° to remove
•
•
•
Acu-Rite Companies Inc.
One Precision Way • Jamestown, NY 14701
4
Surface Grinder: Cross Feed "X" Axis
With the down feed axis installation complete (if
used), route the cables providing sufficient slack
loops for machine movement to the readout.
Secure cables by fastening with clips or ties.
Attach the linear encoder connectors to the readout.
Complete the installation by following the steps in
"Checking Your Installation" section in the encoder
"Reference Manual".
P.N. 385076-130 Ed B 2/06