Cisco Firepower 4125 매뉴얼 - 페이지 3

{카테고리_이름} Cisco Firepower 4125에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Firepower 4125 8 페이지. Rack-mount the chassis
Cisco Firepower 4125에 대해서도 마찬가지입니다: 매뉴얼 (38 페이지), 시작하기 (42 페이지)

페이지 인쇄

Rack-Mount the Chassis

Figure 1: Attach the Rack Mount Bracket to the Side of the Chassis

Chassis

8-32 x .375-in. countersink Phillips head screws (3 per

side)

Step 2

Attach the inner rails to the sides of the chassis:

a) Remove the inner rails from the slide rail assemblies.

b) Align an inner rail with 1 side of the chassis so that the 3 keyed slots in the rail align with the 3 pegs on the side of

the chassis.

c) Set the keyed slots over the pegs, and then slide the rail toward the front to lock it in place on the pegs. The rear key

slot has a metal clip that locks over the peg.

d) Secure the inner rail to the side of the chassis using 1 M3X6mm screw.

e) Install the second inner rail to the opposite side of the chassis and secure with the other M3X6mm screw.

Rack-mount bracket

Rack-Mount the Chassis