Cisco Gigabit Switch Router Cisco 12012 교체 지침 매뉴얼 - 페이지 21
{카테고리_이름} Cisco Gigabit Switch Router Cisco 12012에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Gigabit Switch Router Cisco 12012 34 페이지. Gigabit switch router cablemanagement
kit
Cisco Gigabit Switch Router Cisco 12012에 대해서도 마찬가지입니다: 교체 지침 매뉴얼 (6 페이지), 데이터시트 (9 페이지), 교체 지침 매뉴얼 (20 페이지), 설치 지침 매뉴얼 (14 페이지)
페이지 인쇄
Figure 13
Bolts
Removing the Card Cage Assembly
Perform the following steps to remove the card cage assembly (refer to Figure 14):
Caution
the assembly. To prevent injury, keep your back straight and lift with your legs, not your back.
Step 1
Step 2
Step 3
If you plan to return the old card cage assembly to the factory, repackage it in the shipping container
you received with the replacement card cage assembly.
Removing a System Grounding Cable
Grounding lug
An empty card cage assembly weighs 65 lb (29.5 kg). You need two people to safely lift
Loosen the six captive screws on the front edges of the card cage assembly that secure it
to the frame.
With one person positioned on each side of the frame, grasp the handle at the top of each
side of the card cage assembly and carefully slide the card cage assembly half way out of
the front of the frame.
With your free hand, grasp the handhold cutout on each side of the card cage assembly
and carefully slide the card cage assembly completely out of the front of the frame.
Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions
Removing and Replacing a Card Cage Assembly
System
grounding
receptacles
21