Cisco Gigabit Switch Router Cisco 12012 교체 지침 매뉴얼 - 페이지 26
{카테고리_이름} Cisco Gigabit Switch Router Cisco 12012에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Gigabit Switch Router Cisco 12012 34 페이지. Gigabit switch router cablemanagement
kit
Cisco Gigabit Switch Router Cisco 12012에 대해서도 마찬가지입니다: 교체 지침 매뉴얼 (6 페이지), 데이터시트 (9 페이지), 교체 지침 매뉴얼 (20 페이지), 설치 지침 매뉴얼 (14 페이지)
페이지 인쇄
Removing and Replacing a Card Cage Assembly
Step 8
Step 9
Step 10
Figure 15
cable-management
Interface
cable
26 Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions
Proceeding from bottom port to the top port (line cards with multiple ports only) identify
the interface cable that connects to each line card port. Connect the interface cable to the
line card port. (Refer to Figure 15a.)
Proceeding from bottom port to the top port (line cards with multiple ports only),
carefully press the interface cable into the vertical cable bracket cable clip. (Refer to
Figure 15b.) Avoid any kinks or sharp bends in the interface cable.
Proceeding from bottom port to the top port (line cards with multiple ports only), route
the interface cable up the vertical cable bracket and carefully press the interface cable into
the rest of the cable clips. (Refer to Figure 15c.) Avoid any kinks or sharp bends in the
interface cable.
Attaching an Interface Cable to a Line Card
Chassis
tray
a
Line card
cable-management
bracket
b
Cable clip
c
Cable clips