Argon 18 RADON 조립 설명서 - 페이지 8

{카테고리_이름} Argon 18 RADON에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argon 18 RADON 16 페이지.
Argon 18 RADON에 대해서도 마찬가지입니다: 조립 설명서 (12 페이지)

RADON 237A: 5. Frameset Inspection

BEFORE ASSEMBLING YOUR NEW RADON, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:

1: Frameset parts checklist (see p.15)

2: Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)

3: For reference, check serial number and write it on p.2

4: All the necessary bolts (refer to Frameset Parts, p.15)

5: For optimal shifting performance, use a dropout alignment gauge to make sure that the drive-side dropout is straight (p.9)

IMPORTANT:

The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts

according to their torque specifications.

Parts installed on the frame

Rear derailleur hanger

Bottle cage

Bottom bracket cable guide

Description

Screw (2)

Screw (4)

Screw (1)

Screw

Torque

Detail

type

3mm

4Nm

Loctite

5mm

3Nm

Grease

5mm

1.5Nm

Grease