Argon 18 RADON Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу для Велосипед Argon 18 RADON. Argon 18 RADON 16 сторінок.
Також для Argon 18 RADON: Посібник з монтажу (12 сторінок)
Друкувати сторінкуRADON 237A: 5. Frameset Inspection
BEFORE ASSEMBLING YOUR NEW RADON, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1: Frameset parts checklist (see p.15)
2: Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
3: For reference, check serial number and write it on p.2
4: All the necessary bolts (refer to Frameset Parts, p.15)
5: For optimal shifting performance, use a dropout alignment gauge to make sure that the drive-side dropout is straight (p.9)
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts
according to their torque specifications.
Parts installed on the frame
1
Rear derailleur hanger
2
Bottle cage
3
Bottom bracket cable guide
Description
Screw (2)
Screw (4)
Screw (1)
Screw
Torque
Detail
type
Nm
3mm
4Nm
Loctite
5mm
3Nm
Grease
5mm
1.5Nm
Grease
8