Cisco IAD2430 Series 개요 매뉴얼 - 페이지 12

{카테고리_이름} Cisco IAD2430 Series에 대한 개요 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IAD2430 Series 13 페이지. Integrated access device
Cisco IAD2430 Series에 대해서도 마찬가지입니다: 개요 (16 페이지), 빠른 시작 매뉴얼 (34 페이지)

페이지 인쇄
Cisco IAD2430 Series 개요 매뉴얼

Software Elements

Software Elements
The operating system for Cisco IAD2430 series IADs is the Cisco IOS software that resides in flash
memory.

Configuration Connections

You can use an ASCII terminal or a PC to configure a Cisco IAD2430 series IAD. The configuration can
be performed in several ways:
•
•
•

Configuration Methods

Automated Configuration
If your Cisco IAD2430 series IAD was ordered with the Simple Network-Enabled Auto-Provision
(SNAP) option, no on-site configuration is required. When the Cisco IAD is powered on and connected
to the WAN, the SNAP application downloads the applicable configuration files automatically. For
additional information about SNAP, refer to the
Cisco 2420 Series IAD
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t8/ftapiad8.htm

Manual Configuration

When a Cisco IAD2430 series IAD is first installed, use the procedure in
Chapter 4, "Powering On Cisco IAD2430 Series IADs,"
communication parameters. After the Cisco IAD is operating and able to communicate, use the
procedures in the
and functions, or to make changes to the existing configuration.
There are multiple methods for configuring a Cisco IAD2430 series IAD:
•
•
•
•
•
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
1-12
Locally, with a direct connection through the console port
Remotely, with a connection through the auxiliary port and a modem
Through Telnet and TFTP
feature module at the following URL:
Cisco IAD2430 Series Software Configuration Guide
System configuration dialog
Configuration mode—Cisco IOS software command-line interface (CLI)
Setup command facility—Remote configuration through a LAN or WAN
SNMP-based application—CiscoView or HP OpenView
HTTP-based configuration server—Provides access to the CLI from a web browser
Chapter 1
Overview of Cisco IAD2430 Series IADs
Simple Network-Enabled Auto-Provisioning for
for the initial configuration. This sets the basic
to configure the specific services
OL-4234-05