Cisco IAD2430 Series Manual de síntese - Página 12

Procurar online ou descarregar pdf Manual de síntese para Hardware de rede Cisco IAD2430 Series. Cisco IAD2430 Series 13 páginas. Integrated access device
Também para Cisco IAD2430 Series: Visão geral (16 páginas), Manual de início rápido (34 páginas)

Imprimir página

Software Elements

The operating system for Cisco IAD2430 series IADs is the Cisco IOS software that resides in flash

memory.

Configuration Connections

You can use an ASCII terminal or a PC to configure a Cisco IAD2430 series IAD. The configuration can

be performed in several ways:

•

Configuration Methods

Automated Configuration

If your Cisco IAD2430 series IAD was ordered with the Simple Network-Enabled Auto-Provision

(SNAP) option, no on-site configuration is required. When the Cisco IAD is powered on and connected

to the WAN, the SNAP application downloads the applicable configuration files automatically. For

additional information about SNAP, refer to the

Cisco 2420 Series IAD

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t8/ftapiad8.htm

Manual Configuration

When a Cisco IAD2430 series IAD is first installed, use the procedure in

Chapter 4, "Powering On Cisco IAD2430 Series IADs,"

communication parameters. After the Cisco IAD is operating and able to communicate, use the

procedures in the

and functions, or to make changes to the existing configuration.

There are multiple methods for configuring a Cisco IAD2430 series IAD:

•

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

1-12

Locally, with a direct connection through the console port

Remotely, with a connection through the auxiliary port and a modem

Through Telnet and TFTP

feature module at the following URL:

Cisco IAD2430 Series Software Configuration Guide

System configuration dialog

Configuration mode—Cisco IOS software command-line interface (CLI)

Setup command facility—Remote configuration through a LAN or WAN

SNMP-based application—CiscoView or HP OpenView

HTTP-based configuration server—Provides access to the CLI from a web browser

Chapter 1

Overview of Cisco IAD2430 Series IADs

Simple Network-Enabled Auto-Provisioning for

for the initial configuration. This sets the basic

to configure the specific services

OL-4234-05