Cisco IAD2430 Series 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} Cisco IAD2430 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IAD2430 Series 34 페이지. Integrated access device
Cisco IAD2430 Series에 대해서도 마찬가지입니다: 개요 매뉴얼 (13 페이지), 개요 (16 페이지)

페이지 인쇄
Cisco IAD2430 Series 빠른 시작 매뉴얼
Table 1
Bracket Attachment Screws for Rack-Mounting and Wall-Mounting
Rack-Mounting
Eight Phillips head screws (four per bracket).
Washers are not required.

Using Rack-Mount Brackets

A new bracket accompanies this product. See Figure 6. This rack-mount bracket, with a keyhole feature, facilitates
wall-mounting by allowing the installer to rest the bracket on a starter screw, freeing the installer's hands.
• To rack-mount the unit, you have three positioning options. See the "Rack-Mounting the Chassis" section on page 12.
• To wall-mount the unit, attach the short leg of the bracket to the chassis at the pair of holes in the center of the chassis side.
See the "Wall-Mounting the Chassis" section on page 13.
Figure 6
Rack-Mount Bracket
Figure 7 shows the rack-mount bracket for the Cisco IAD2435-8FXS model.
Figure 7
Rack-Mount Bracket (Cisco IAD2435-8FXS only)
Wall-Mounting
Four 6-32 slotted hex screws (two per bracket) and four plastic washers.
Washers are required.
11