Digitrax DT400R 매뉴얼 - 페이지 2
{카테고리_이름} Digitrax DT400R에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitrax DT400R 9 페이지.
페이지 인쇄DT402D
When a 9 volt battery is inserted in a
DT402D throttle, the following three
splash screens are displayed in
sequence.
The first splash screen displays the
firmware ID and version.
The second splash screen displays
the Duplex Group Name and Duplex
Channel ID. The group name for our
N-Trak layout is currently set to
OKNRail and the channel is 26.
The third splash screen displays the
battery voltage and Duplex Channel
ID. A DT402D throttle needs at least
8.0V to operate reliably
A DT402D has a duplex (two way) radio capability. If the throttle displays the correct Duplex Group
Name and Duplex Channel ID, all throttle functions can be performed with out being plugged into the
LocoNet, and the throttle should not be plugged into the LocoNet. If the throttle does not display the
correct Duplex Group Name and Duplex Channel ID, briefly plug the throttle into the LocoNet to set
the group name and channel.