Digitrax DZ126IN 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Digitrax DZ126IN에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitrax DZ126IN 12 페이지. Complete train control

Parts List

1 DZ126IN Mobile Decoder

1 Instruction Sheet

See the Digitrax Decoder Manual for complete decoder test procedures, instal-

lation instructions, programming and technical information. Digitrax manuals

and instructions are updated periodically. Please visit www.digitrax.com for the

latest versions, technical updates and additional locomotive-specific installation

instructions. CAUTION: Programming and layout track must not exceed

16V when using this decoder.

Carefully remove the locomotive's shell from the frame. Notice the orienta-

tion of the shell to the frame so that you can reinstall correctly.

Remove the 6 pin analog shorting plug and in its place insert the DZ126IN

decoder with the correct pin-1 orientation. The DZ126IN has 6 pins that

insert directly into the 6 pin socket (NEM 651 type) on the locomotive's PCB.

The DZ126IN's small size allows the decoder to be easily installed in a variety

of European locomotives. For the Kato EMD Class 66 example, the DZ126IN

should be inserted in the socket as shown in Figure 2.

Pin 1

Figure 1: Kato factory N-EMD class 66

Factory Analog

shorting plug

— 2 —