argon audio tt-2 소유자 매뉴얼 - 페이지 9
{카테고리_이름} argon audio tt-2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. argon audio tt-2 12 페이지.
argon audio tt-2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 사용자 설명서 (12 페이지)
TT- 2
Adjusting the azimut
** The cartridge needle must be vertical in the record groove in order to trace the groove wall
modulations correctly.
A small screw at the bearing end of the arm allows incorrect azimut to be corrected if your
needle is not mounted exactly perpendicular to the cartridge body (which is often the case).
Slacken off the screw just enough to be able to revolve the arm tube without applying force.
Note! Do not remove the screw completely!
With the aid of a good magnifying glass adjust the needle until it is vertical in the groove (i.e. perpendicular to the record's
surface). Ideally this should correspond to the top surface of the cartridge body being parallel to the record surface. When you are
satisfied that the needle is vertical retighten the screw carefully.
Under no circumstances should the arm tube be adjusted with the needle still in the record groove! Irreparable damage may be
caused to the cantilever suspension! The arm must be lifted to make each adjustment and lowered afterwards to check it.
w w w . a r g o n a u d i o . c o m
9