argon audio tt-2 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Gramofon argon audio tt-2. argon audio tt-2 12 stron.
Również dla argon audio tt-2: Instrukcja obsługi (12 strony), Podręcznik użytkownika (12 strony)

Drukuj stronę

TT- 2

Adjusting the azimut

** The cartridge needle must be vertical in the record groove in order to trace the groove wall

modulations correctly.

A small screw at the bearing end of the arm allows incorrect azimut to be corrected if your

needle is not mounted exactly perpendicular to the cartridge body (which is often the case).

Slacken off the screw just enough to be able to revolve the arm tube without applying force.

Note! Do not remove the screw completely!

With the aid of a good magnifying glass adjust the needle until it is vertical in the groove (i.e. perpendicular to the record's

surface). Ideally this should correspond to the top surface of the cartridge body being parallel to the record surface. When you are

satisfied that the needle is vertical retighten the screw carefully.

Under no circumstances should the arm tube be adjusted with the needle still in the record groove! Irreparable damage may be

caused to the cantilever suspension! The arm must be lifted to make each adjustment and lowered afterwards to check it.

w w w . a r g o n a u d i o . c o m