argon audio tt-2 소유자 매뉴얼 - 페이지 9

{카테고리_이름} argon audio tt-2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. argon audio tt-2 12 페이지.
argon audio tt-2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 사용자 설명서 (12 페이지)

페이지 인쇄

Changing replay speed

To play records at 45 r.p.m. first remove the platter (3). Using the accessory tool provided, hook the belt over the larger diameter

part of the motor pulley (2/22). Refit the platter. To revert to 33,33 r.p.m. repeat the proceedings using the smaller step on the

pulley.

Fitting and connecting the cartridge

** All cartridges with half inch mounting holes can be fitted. Leaving the needle's protection cover on, fit the cartridge to the

headshell using the screws supplied with the cartridge by passing one screw through each slot in the headshell (11). Do not

tighten the nuts yet.

Connect the tonearm wires to the cartridge pins as follows:

white

left channel positive (L+)

red

right channel pos. (R+)

green

right channel return (R -)

blue

left channel return (L -)

The full sound quality of the Argon Audio TT2 can only be achieved if the cartridge is correctly adjusted.

If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your Argon Audio

dealer to accomplish this task for you.

w w w . a r g o n a u d i o . c o m

TT- 2